We do not have custom hitch covers available, but you could always just use the Blank Square Trailer Hitch Cover # AUT-BNK3-S and have your logos engraved. view full answer...
The most rigid spare tire cover we have that'll work with your 225 x 75 x 15 tires is the Classic Accessories Spare Tire Cover for 28" to 29" Diameter Tires # 052963751406.
This cover is made from a durable rugged vinyl material that also has a blank white canvas for you to print a custom design on. view full answer...
There are a number of different configurations of the 1929 Model A, but we do have most of them covered. For example, something like the Covercraft Reflec'Tect Custom-Fit Outdoor Vehicle Cover - Silver # C12824RS fits the Coupe without rear spare tire, with sidemounts, with trunk, without slant window, and without visor. This is a custom fit cover for that specific setup of the Model A, but there are a number available.
I've linked our entire selection of potential covers for your 1929... view full answer...
I believe we have exactly what you want for your 2022 Hyundai Kona. Covercraft WeatherShield HP Custom-Fit Outdoor Vehicle Cover # C18365PB, is the best combination outdoor all weather cover with fade resistance. The patented finish has a soft touch and does it great job repelling water and dirt.
This cover comes with tie down ropes, and includes 2 built-in mirror covers, and 1 antenna pocket. view full answer...
I may have a solution for you, but the storage cover # 333-0009 is no longer available. However, I've had a couple of other customers successfully use the Storage Cover for etrailer 4,500-Watt Generator - Weather Resistant # 333-0008 even though it's a bit bigger. This would be the only available option for a medium sized generator like your A-iPower. view full answer...
After doing some research I found out that your LT 215/35 R16 tire has a 21.9 inch diameter. You will need The Classic Accessories Custom Fit Spare Tire Cover # 052963751000.
This cover has an elastic back hem that gives it a fast and adjustable fit. It has a rugged wipe-clean vinyl with a soft, non-scratch backing. The cover is also water-repellent and resistant. The cover has a 3-year warranty.
I attached a review video link below. view full answer...
The largest 5th wheel hitch cover we have is the Classic Accessories Cover # CA80116 which measures 24" x 24" x 18". Even though it is a bit smaller than your 5th wheel hitch we have had a number of customers use it to cover the majority of their 5th wheel hitch (see pictures on product page). So while it isn't a perfect fit, it will do a decent job of covering most of your 5th wheel hitch to help protect it from the elements. view full answer...
Glad to hear that you are enjoying your 5th wheel sliding hitch! We do have some cover options that will work great for you.
If you are just wanting to cover the hitch head you can use the Reese 5th Wheel Trailer Hitch Cover # RP30055. Although it was made specifically for Reese, Draw-Tite and Hidden Hitch classic-style fifth-wheel trailer hitches, it will essentially fit any 5th wheel hitch head. This is reflected in the numerous positive customer feedback that this cover has received.
If... view full answer...
I would be happy to help you find a ladder rack that will fit your 2022 Ford F-150 and be compatible with your BAKFlip MX4 Tonneau Cover item # BAK46FR. I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack item # A4000946. This streamlined ladder rack is custom fit for your 2022 Ford F-150 and works with your inside-the-rail tonneau cover. It has a 500 lbs load-carrying capacity allowing you to carry ladders, lumber, piping, skis, snowboards, canoes, kayaks, surfboards, and other... view full answer...
According to my research, the 1989 Bronco II used P205/75-15 tires as the stock tire size.
If this is the size of your spare tire, and my arithmetic is correct your tire is 27 inches in diameter. If you click the provided link, you can see the various colors and styles of covers we offer for your wheel size.
I'd recommend one of the covers offered by Rampage. The covers are manufactured of the same fabric that Rampage uses in their replacement Jeep soft tops, so you know the covers will... view full answer...
I have a perfect fold up bed cover for you that will go great with your new 2022 GMC Sierra 3500. It is the BAKFlip F1 Hard Tonneau Cover item # BAK37FR. This is a custom fit aluminum and fiberglass quad-fold cover that sits inside your GMC Sierra 3500's bed rails. The textured, black powder coat provides durability. It has an easy, no-drill installation with frame rails that clamp to the inside of your truck bed side rails. The included bolts secure the front hinge to the frame rails.... view full answer...
Yes, that is definitely something that can be covered. The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2", part # 391TES317, you installed on your 2022 Tesla Model 3, leaves a hole in your vehicle's lower fascia after installation. This can be taken care of with the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver, part # 306-XA2002. This attaches to your Stealth Hitch via a magnet. It comes equipped seals to keep this cover in place.
I have included product... view full answer...
The Adco Olefin HD All-Climate # AD99ZR is an all weather cover, that will protect your 5th wheel against rain, wind, dirt, and sun. This cover works best in long term storage in all climates.
However, based on my research your trailer is listed at 150" which may not be compatible with this cover. To be sure, I recommend measuring from the bottom of the trailer to the top of the trailer; and from the front of the trailer to the back. This will ensure that you have the correct measurements... view full answer...
I do have a solution for you, however unfortunately we do not carry any replacement parts for Assault tonneau covers. With that being said, your only real option is to replace the entire cover with something else. I know that's not what you're looking to do, but this is your only real option.
If you're open for suggestions, I recommend checking out the Extang Trifecta 2.0 Soft Tonneau Cover # EX92410. This cover is custom fit for your 2014 Ford F-150, has a tri-folding design made from... view full answer...
Without knowing what you have right now on your 2005 Itsaca Horizon, I won't be able to make a recommendation for a custom fit roof vent lid, however we do have the:
-MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335002, which is a translucent black, universal lid that'll work for your 14"x14" roof vent.
This roof vent is also fairly economical compared to its custom fit counter-parts, and requires no drilling if you're using the Ventline Ventadome. view full answer...
To cover the Curt Q25 # C16049 installed on your 2014 Ram 3500 I recommend the Classic Accessories Cover # CA80116. There isn't a custom cover for the Q25 but this is a great option that has had a lot of success with many 5th wheel hitches including the B&W Companion which is a bit bulkier than your Q25.
The cover for the center hole for the OEM puck system on your Ram is part # C66145. It has an inner diameter of 2-1/4" and an outside diameter of 3-1/4" which matches up with what comes... view full answer...
If you already have a TracRac ladder rack on your 2014 Ram 1500 then it depends on which rack you have as to whether a tonneau can fit. If your ladder rack installs into the stake pockets and doesn't clamp around the truck's bed rails there are several that will fit.
The most popular is the BAK Revolver X2 Hard Tonneau Cover # BAK39207 which installs inside the bed rails and is compatible with stake pocket ladder racks. It's custom fit to your Ram with a 5-1/2 foot bed as long as you... view full answer...
If you are looking for protection from rocks between your bed liner and where the tailgate begins, there needs to be a balance between functionality and protection. The reason why something like a bed cover like the Access Custom Truck Bed Mat - Snap-In Bed Floor Cover # A67SJ is because the cover does not extend over to the tailgate; it simply ends at the rear of your bed without covering the gap. Also, any bed floor cover that covers the gap will impact the functionality of the rear tailgate... view full answer...
The thumb releases for your Extang Tuff Tonno on your 2007 Ford F-150 are not actually available for replacement. However, for replacement parts for the Tuff Tonno, we do carry the:
- Replacement Tarp for Extang Tuff Tonno Soft Roll-Up Tonneau Cover # EX13405 for a short (5.5') bed,
&
- Replacement Tarp for Extang Tuff Tonno Roll-up Soft Tonneau Cover # EX13790 for the regular (6.5') bed.
We also offer the replacement fixed bow end # EX4100 & the replacement tailgate Velcro strip #... view full answer...
The BAK Revolver X2 Hard Tonneau Cover # BAK39409 is confirmed to fit your 2021 Toyota Tundra. The T-Rac Pro 2 Ladder Rack # TH37002XT will not work with The BAK Revolver.
The Adarac Pro Series Custom Truck Bed Ladder Rack will work with The BAK Revolver tonneau cover but it only has a 500 pound capacity. The rack is made out of a lightweight aluminum which is rustproof. It has an easy, no drill installation that comes with included hardware.
The Adarac Truck Bed Ladder Racks are the... view full answer...
Go To Results